- 您现在的位置：买卖IC网 > Sheet目录1251 > UB232R (FTDI, Future Technology Devices International Ltd)MOD USB UART MINI B DEV FT232R
Document Reference No.: FT_000055
UB232R USB Mini-B FT232R Evaluation Module Datasheet Version 1.12
Clearance No.: FTDI# 43
Appendix A – FT232R EEPROM Configuration
This FT232R device within the UB232R module contains an EEPROM which contains the USB configuration
descriptors for that device. When the UB232R is plugged into a PC or a USB reset is performed, the PC
will read these descriptors. The default values stored into the internal EEPROM are defined in Table 6.1
Parameter
USB Vendor ID (VID)
USB Product UD (PID)
Serial Number Enabled?
Serial Number
Pull down I/O Pins in USB
Suspend
Manufacturer Name
Product Description
Max Bus Power Current
Power Source
Device Type
USB Version
Remote Wake Up
High Current I/Os
Load VCP Driver
Invert TXD
Invert RXD
Invert RTS#
Invert CTS#
Value
0403h
6001h
Yes
See Note
Disabled
FTDI
UB232R
90mA
Bus Powered
FT232R
0200
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Notes
FTDI default VID (hex)
FTDI default PID (hex)
A unique serial number is generated and programmed into
the EEPROM during device final test.
Enabling this option will make the device pull down on the
UART interface lines when the power is shut off (PWREN#
is high).
Returns USB 2.0 device description to the host.
Note: The device is be a USB 2.0 Full Speed device
(12Mb/s) as opposed to a USB 2.0 High Speed device
(480Mb/s).
Taking RI# low will wake up the USB host controller from
suspend.
Enables the high drive level on the UART and CBUS I/O
pins.
Makes the device load the VCP driver interface for the
device.
Signal on this pin becomes TXD# if enable.
Signal on this pin becomes RXD# if enable.
Signal on this pin becomes RTS if enable.
Signal on this pin becomes CTS if enable.
Table 6.1 Default Internal EEPROM Configuration
The internal EEPROM in the FT232R can be re-programmed over USB using the utility program FT_PROG.
FT_PROG can be downloaded from the www.ftdichip.com . Users who do not have their own USB
Vendor ID but who would like to use a unique Product ID in their design can apply to FTDI for a free
block of unique PIDs. Contact FTDI support for this service.
Copyright ? 2010 Future Technology Devices International Limited
10
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
UCBBJE20-2
BNC BULKHD JACK 75 OHM EDGE PCB
UCBJE20-1
BNC JACK 75 OHM PCB EDGE MNT
UCBJR220
BNC JACK 75 OHM R/A PCB
UCC28051EVM
EVAL MODULE FOR UCC28051
UCD90SEQ48EVM-560
EVAL MOD FOR UCD9090-560
UE27AC5410H
USB RCPT GOLD TYPE A R/A
UE27AE5410H
USB RCPT GOLD TYPE A VERT
UE27BC54130
USB RCPT GOLD TYPE B R/A
相关代理商/技术参数
UB2-3NE-L
制造商:World Products 功能描述:
UB2-3NJ
制造商:NEC 制造商全称:NEC 功能描述:Super-compact size, Slim-package, Surface mounting type
UB2-3NJ-L
制造商:NEC 制造商全称:NEC 功能描述:Super-compact size, Slim-package, Surface mounting type
UB2-3NJ-R
制造商:NEC 制造商全称:NEC 功能描述:Super-compact size, Slim-package, Surface mounting type
UB2-3NU
功能描述:低信号继电器 - PCB DPDT 3V NON-LATCH
RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗:
UB2-3NU-L
制造商:World Products 功能描述:Electromechanical Relay DPDT 1A 3VDC 64.3Ohm Surface Mount
UB2-3NUN
制造商:World Products 功能描述:Electromechanical Relay DPDT 1A 3VDC 64.3Ohm Surface Mount
UB2-3NUN-L
制造商:World Products 功能描述: